**Artist Book Editions**

**CATALOG NO. B37-2010Ocean Wave**

15 x 14-1/2 x 2" closed;

15" x 14-1/2" x 45" open

Edition of 5

**Permanent Collection - Temple University Special Collections Department,
Temple University Libraries - Rhode Island School of Design, Fleet Library, Special Collections**

Multi-panel cut paper 3D model, 14" x 45" open with hard-bound case; multi-color reduction linocut print, 10" x 42", detailed pamphlet of preparatory drawings.

Click on the images for an enlarged view of the work and more information.

This multi-part artist book constructs a virtual ocean wave by using sequential random numbers and a simple mathematical formula. The virtual wave is represented as it would appear in nature from two perspectives: A 3d paper model and a reduction linocut print. The pull-out three-dimensional paper model has thirty-two sequential paper wave cross sections covering an area of 15” x 40”. A 10” x 42” multi-color linocut print is a pictorial representation of the cross sections.

To establish the physical characteristics of this wave, I am using data and formulas from a classic work on wave forecasting developed after World War II. Conditions chosen were: 50-knot wind, typical wave height 40 to 50 feet, typical wave length 700 feet, with a ratio of wave length to height of 15 to 1. The 3D paper model is constructed at a scale of 1= 300 or 1” = 25 feet. The linocut print image is based on the 3D model and augmented using written descriptions of actual wind conditions as well as reference photographs from the Beaufort Wind Scale. However, the linocut image does not exist in photographic form.

**Deriving the wave shape** All wave forms
are sequential objects defined by a series of points moving through
space and time creating an oscillating motion and a periodic
repetition of the basic wave form.

Since ocean waves are
basically sinusoidal, I derived the virtual wave I derived the virtual wave by
using a sine function with a random number component. This produced an irregular sine wave
approximating what might exist in nature (fig. 1.)

**Creating the sequence of wave cross sections**Using the principles of self similarity in nature
I used a simple feedback function to create a sequence of cross sections
of the original wave shape (fig. 1) at different relative scales.
I used 3D CAD software to draw a 3D computer model of the wave (fig. 2)
and chose an area of this 3D computer model for the paper model. I printed
the thirty-two individual cross sections and modified them, by hand, to
produce the slight alterations that actual wind conditions would produce (fig. 3).
I then used a saw to cut the sections out of the paper and assemble the model.
The result: 32 cross sections, in sequence, form a three dimensional
representation of the wave.
Illustration
The resulting sections were modified, by hand, to produce the slight alterations that actual wind conditions would produce. The model was then assembled.